<small id="4o8tm"><delect id="4o8tm"><font id="4o8tm"></font></delect></small>

      <small id="4o8tm"><delect id="4o8tm"></delect></small>

        1. Hardware & Wares Inventory

          2 – toggles (mis-matched)
          2 – 1_1/4 inch steel “O” rings
          4 – miscellaneous webbing transition to stay slider things
          2 – 1 inch by 25 inch aluminum backpack stays
          1 – complete airliner seat-belt set
          61 inches of 3/4 inch black webbing (in miscellaneous lengths)
          5_3/8 continuous yards of 3/4 inch black webbing
          13 – miscellaneous pieces of 5/8 inch heavy duty black webbing
          40 continuous inches of 2 inch black dive belt webbing
          30 inches of 2 inch black seat belt webbing (in miscellaneous lengths)
          5_5/8 continuous yards of 2 inch black seat belt webbing
          3_7/8 continuous yards of 2 inch silver seat belt webbing
          3 – rubber bands
          29 inches of 1 inch black webbing (in miscellaneous lengths)
          5_1/8 continuous yards of 1 inch black webbing
          a lot of 1/2 inch black webbing (continuous)
          a lot of 5/8 inch black webbing (continuous)
          1 – pre-made 1 inch by 25 inch compression strap (purple)
          4 continuous yards of black Velcro (hook)
          4 continuous yards of black Velcro (loop)
          2 yards + 20 inches of 1 inch black Velcro (hook) [continuous]
          2 yards + 32 inches of 1 inch black Velcro (loop) [continuous]
          1 – 26 inch black 2way zipper
          1 – 11 inch black zipper
          1 – 14 inch black zipper
          1 – 21 inch lightweight black zipper
          2 – 17 inch lightweight black zippers
          1 – 26 inch vinyl coated marine grade zipper
          1 – 11 inch vinyl coated marine grade zipper (no pull tab)
          2 – pull tab sets for vinyl coated marine grade zippers
          3 – miscellaneous pieces/patches of Cordura (black and camo)
          250 cubic inches of black 4 mm Neoprene
          19 inches of white stiffening unit/stays
          29 inches to 35 inches of 1 inch reflective strips (in miscellaneous lengths)
          120 inches of 1/8 inch-square leather lacing (in miscellaneous lengths)
          141 inches of lightweight cording (black and white) [in miscellaneous lengths]
          bias tape – black, cream, grey, maroon, 1/2 inch and 1/4 inch widths (miscellaneous packs)
          6 – 1 inch to 3/4 inch sternum strap loops
          6 – 3/4 inch tri-glides
          7 – 3/4 inch ladder locks
          9 – 1 inch ladder locks
          11 – 3/4 inch side release buckles ( +2 extra males)
          6 – 1 inch side release buckles
          2 – quick clips
          2 – 1 inch “D” rings (with slot)
          1 – 2 inch “D” ring (with slot)
          4 – heavy duty snap hooks (metal and plastic construction)
          2 – 2 inch side release buckles (1 contoured)
          1 – 2 inch nylon cam buckle
          3 – 2 inch eccentric cam buckles
          1 – 2 inch Ancra spring loaded cam buckle (steel and aluminum construction)
          1 – miscellaneous Timbuk2 removable sternum strap assembly
          3 – 2 inch Airloc side release buckles (single sided adjust)
          3 – Airloc Quad buckles
          4 – 2 inch WDR “D” rings
          3 – 3/4 inch Vector SewMount side release buckles


          Keeping with the idea of cutting devices here are a couple more images. One is an image of the tools that aid the projects made on the Brother DB2-B791-015. And one of an image found via the Internet of someone cutting a large bulk of denim, it is hard to say how much but you can look and see for yourself. The tool this person is using is clearly similar to the Blue Streak II but on steroids.


          The following is a recently received comment which is quite intriguing –

          >>“Can we get a moment of silence for this small chronic break?…..”

          >>”(During which time I’ll quickly interject some thoughts on the DeWalt 12″ Double-Bevel Compound Miter Saw. Is it appropriate in this forum to speak of this machine? It would seem so, or “seam” so, insomuch as the miter saw is divisive at separating material into two pieces, or creating a seam. I suppose its equivalent here would be the “seam ripper” or a pair of shears or scissors. The efficiency this particular saw exhibits, in my limited experience, I find fascinating. The torque coming up from the spinning blade, the tears a soft wood lets out as the blade turns its solid into particles, the smooth dimensional prison this tool captures trees in [by the way, did you know they are growing square ones now?]. The operational function is very simple, or at least in terms of the user’s involvement: just pull down, “chop,” and multiples abound. What are your thoughts on a machine like the Dewalt 12″ Double-Bevel Compound Miter Saw? It creates the pieces and parts to be brought together into some-thing that your machine in a way fulfills – although in a different area and with different material. What sort of relationship do these two monsters have?)”<<

          Very interesting indeed. The only way to get into this question would be to propose the industrial sewing equipment equivalent – the Blue Streak II –

          with a reciprocating (also called oscillating) vertical blade that does the cutting, much like a jigsaw. In the picture you see the blade is about 6″ tall and sits atop a base that has small wheels at each corner so that the Blue Streak II can be pushed around a pattern which is layed flat on the floor or table. These types of industrial fabric cutters are capable of cutting fabric up to 5″ thick, which means that you can cut out many patterns at once. Typically these are only used in large production houses such as a sail making shop, where there will be cuts as long as 10 meters, which for obvious reasons would require this kind of tool. A chain-mail glove is worn as the user walks around the pattern which is weighted to the floor with bricks or other weighting devices so that the multiple layers of fabric do not slide or shift while cutting, causing irregularities in their carefully planned patterns. When all of your cutting is done, it is time to re-sharpen the blade. This is accomplished by two bands of fine tooth sandpaper or emery cloth, which come in contact to the blade at about a 15-20 degree angle. In the picture you can locate these just under the main body of the cutter, they look like rubber bands and are perpendicular to the blade. With the flick of a switch they are driven like a chain on a bike and simultaneously slide down the blade and back up again. It is not something to lose a finger in.

          Perhaps the most interesting relationship between these two cutting/dividing devices is that they both split nearly millions of fibers within seconds. Whether it is wood or fabric, both are composed of grain, warp, weft, fibers, structural patterns – human made and organic, which are most of all – naked to the eye.